Bambu Lab ASA print temperature and settings
The settings Bambu Lab publishes for its ASA: 250 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Bambu Lab's recommended nozzle range is about 5°C cooler than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Bambu Lab sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 396 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
7 Bambu Lab ASA colors
- Black
- Blue
- Gray
- Green
- Red
- White
- White Aero
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Bambu Lab ASA at?
Bambu Lab lists 250–250°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Bambu Lab ASA?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does Bambu Lab ASA come in?
7 in the data we track, including Black, Blue, Gray and Green.