Rosa3D PLA print temperature and settings
The settings Rosa3D publishes for its PLA: 210 °C at the nozzle and 55 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Rosa3D's recommended nozzle range is about 5°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 55 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Rosa3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
41 Rosa3D PLA colors
- PLA Starter Army Green
- PLA Starter Black
- PLA Starter Blue
- PLA Starter Blue Pearl
- PLA Starter Blue Sky
- PLA Starter Carpi Blue Satin
- PLA Starter Chocolate Brown
- PLA Starter Dark Blue
- PLA Starter Emerald Green Satin
- PLA Starter Glitter Bronze
- PLA Starter Glitter Graphite
- PLA Starter Gray
- PLA Starter Green
- PLA Starter Hunter Green
- PLA Starter Juicy Green
- PLA Starter Karmin Red
- PLA Starter Light Brown
- PLA Starter Light Gray
- PLA Starter Mocha Mousse
- PLA Starter Natural
- PLA Starter Neon Fluo
- PLA Starter Neon Green
- PLA Starter Neon Orange
- PLA Starter Orange
- PLA Starter Oxy Green
- PLA Starter Pearl Gold
- PLA Starter Pink
- PLA Starter Porcelain Skin
- PLA Starter Red
- PLA Starter Red Jasper Satin
- PLA Starter Reseda Green
- PLA Starter Rose Beige Skin
- PLA Starter Rubin Red
- PLA Starter Satin Grey
- PLA Starter Satin Pink
- PLA Starter Signal Violet
- PLA Starter Tanned Skin
- PLA Starter Violet Dynamic
- PLA Starter White
- PLA Starter Winter White
- PLA Starter Yellow
Frequently asked questions
What temperature should I print Rosa3D PLA at?
Rosa3D lists 210–210°C at the nozzle and 55–55°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Rosa3D PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Rosa3D PLA come in?
41 in the data we track, including PLA Starter Army Green, PLA Starter Black, PLA Starter Blue and PLA Starter Blue Pearl.