Rosa3D ASA print temperature and settings
The settings Rosa3D publishes for its ASA: 245 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Rosa3D's recommended nozzle range is about 10°C cooler than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 245 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.07 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Rosa3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 389 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
10 Rosa3D ASA colors
- Black
- Blue
- Gray
- Green
- Juicy Orange
- Natural
- Red
- Silver
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Rosa3D ASA at?
Rosa3D lists 245–245°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Rosa3D ASA?
About 389 m at 1.75 mm, from its published density of 1.07 g/cm³.
How many colors does Rosa3D ASA come in?
10 in the data we track, including Black, Blue, Gray and Green.