REDLINE FILAMENT · PLA filament

REDLINE FILAMENT PLA print temperature and settings

The settings REDLINE FILAMENT publishes for its PLA: 195–215 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.

REDLINE FILAMENT's recommended nozzle range is about 10°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).

Print settings

Nozzle195–215 °C
Bed60 °C
Density1.24 g/cm³
Diameters1.75 mm

Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.

How much filament is on a spool

Length from the published density, for each spool size REDLINE FILAMENT sells.

Spool1.75 mm
1 kg≈ 335 m

Printing PLA

Full PLA guide →

The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.

No enclosure neededPrints fine on an open-frame printer.
Brass nozzle is fineNo abrasive fill.
Not very moisture-sensitiveNormal storage is fine for most users.
Any extruderWorks with direct drive and Bowden.

50 REDLINE FILAMENT PLA colors

  • Apfelgrün
  • Beige
  • Beigebraun
  • Blattgrün
  • Blau
  • Braun
  • Bronzegold
  • Crem Weiß (Perlweiß)
  • Dunkelblau
  • Dunkelgrün
  • Eisengrau
  • Elfenbein
  • Gelb
  • Gelbgold
  • Gelborange
  • Glow in the Dark (Blau)
  • Glow in the Dark (Grün)
  • Goldbraun
  • Grau
  • Hellgrau
  • Hellorange
  • Himmelblau
  • Islandblau
  • Khaki
  • Kobaltblau
  • Kupferbraun
  • Lavendel
  • Leichtes Blau
  • Leichtes Grün
  • Leichtes Pink
  • Lila
  • Magenta
  • Maisgelb
  • Natur Transparent
  • Neon Gelb
  • Neon Grün
  • Neon Orange
  • Neon Pink
  • Neon Transparent
  • Olivgrün
  • Orange
  • Orientrot
  • Rot
  • Schwarz
  • Schwefelgelb
  • Silber
  • Taubenblau
  • Wasserblau
  • Weinrot (Braunrot)
  • Weiß
Check prices for REDLINE FILAMENT PLA on Amazon.As an Amazon Associate we earn from qualifying purchases.Search Amazon

Frequently asked questions

What temperature should I print REDLINE FILAMENT PLA at?

REDLINE FILAMENT lists 195–215°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.

How many meters are on a 1 kg spool of REDLINE FILAMENT PLA?

About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.

How many colors does REDLINE FILAMENT PLA come in?

50 in the data we track, including Apfelgrün, Beige, Beigebraun and Blattgrün.

Other PLA brands