RatRig ASA print temperature and settings
The settings RatRig publishes for its ASA: 260 °C at the nozzle and 105 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
RatRig's recommended nozzle range is about 5°C hotter than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 105 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size RatRig sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 396 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
1 RatRig ASA colors
- Punkfil Brute Black
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print RatRig ASA at?
RatRig lists 260–260°C at the nozzle and 105–105°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of RatRig ASA?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does RatRig ASA come in?
1 in the data we track, including Punkfil Brute Black.