Overture ASA print temperature and settings
The settings Overture publishes for its ASA: 240–270 °C at the nozzle and 70–95 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Overture's recommended nozzle range is right in line with the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 240–270 °C | |
|---|---|---|
| Bed | 70–95 °C | |
| Density | 1.14 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Overture sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 365 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
14 Overture ASA colors
- Black
- Blue
- Brown
- Diamond Blue
- Diamond Green
- Diamond Red
- Gray
- Green
- Natural
- Olive Green
- Orange
- Red
- White
- Yellow
Frequently asked questions
What temperature should I print Overture ASA at?
Overture lists 240–270°C at the nozzle and 70–95°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Overture ASA?
About 365 m at 1.75 mm, from its published density of 1.14 g/cm³.
How many colors does Overture ASA come in?
14 in the data we track, including Black, Blue, Brown and Diamond Blue.