Inland PLA print temperature and settings
The settings Inland publishes for its PLA: 215–240 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Inland's recommended nozzle range is about 13°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 215–240 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Inland sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
156 Inland PLA colors
- Black
- Blue
- Blue (834598)
- Blue (841288)
- Bone White
- Brown
- Brown (827295)
- Cool White
- Coral
- Cornflower Blue
- Cosplay
- Dandelion
- Dark Red
- Egyptian Blue
- Glass Light Blue
- Glass Watermelon
- Gold
- Grass Green
- Gray
- Green
- Grey
- High Speed Brown
- High Speed Green
- High Speed Red
- High Speed Silk Black
- High Speed Silk Rose-Gold
- High Speed Silk Shadow
- High Speed Silk White
- High Speed Silk Yellow
- High Speed True Red
- High Speed Violet
- High Speed Yellow
- Inland Blue
- Light Blue (834705)
- Light Brown
- Light Olive
- Matte Army Beige
- Matte Army Purple
- Matte Ash Grey
- Matte Banana
- Matte Black
- Matte Black (LRV 3)
- Matte Black-Orange
- Matte Black-Red
- Matte Blue
- Matte Blue-Red
- Matte Brick Red
- Matte Brown
- Matte Chocolate
- Matte Clay Rainbow
- Matte Denim
- Matte Frosty Amethyst
- Matte Green
- Matte Grey
- Matte Inland Blue
- Matte Light Blue
- Matte Light Pink
- Matte Mint Green
- Matte Orange
- Matte Pastel Pink
- Matte Peach
- Matte Pink
- Matte Purple
- Matte Red
- Matte Red Heather
- Matte Turquoise
- Matte White
- Matte Wood Brown
- Matte Yellow
- Military Brown
- Military Green
- Natural
- Olive Brown
- Orange
- Peak Green
- Pink
- Pink (834689)
- Pink Marble
- Purple
- Red
- Red Raspberry
- Sand
- Sand (LRV 70)
- Silk Army Green
- Silk Black
- Silk Cool Pink
- Silk Copper
- Silk Cyan
- Silk Dark Yellow
- Silk Frosty Evergreen
- Silk Gold
- Silk Green
- Silk Grey
- Silk Light Blue
- Silk Light Coral
- Silk Light Gray
- Silk Magenta
- Silk Orange
- Silk Pewter
- Silk Pink
- Silk Purple
- Silk Red
- Silk Silk Grey
- Silk Silk White
- Silk Silk Yellow
- Silk Silver
- Silk Violet
- Silver
- Tough Black
- Tough Blue
- Tough Brown
- Tough Cold White
- Tough Dark Blue
- Tough Dark Gray
- Tough Gray
- Tough Green
- Tough Illuminated Blue
- Tough Khaki
- Tough Light Blue
- Tough Light Gray
- Tough Light Olive
- Tough Metallic Bronze
- Tough Metallic Dark Red
- Tough Metallic Dk Blue
- Tough Metallic Gold
- Tough Metallic Silver
- Tough Military Green
- Tough Orange
- Tough Pearl White
- Tough Pink
- Tough Purple
- Tough Raspberry Red
- Tough Red
- Tough True Red
- Tough White
- Tough White Marble
- Tough Yellow
- Translucent Autumn Orange Grey
- Translucent Blue / Purple
- Translucent Blue/Green
- Translucent Glass Light Blue
- Translucent Glass Orange
- Translucent Glass Purple
- Translucent Glass Watermelon
- Translucent Glass watermelon red
- Translucent Glass Yellow
- Translucent Winter
- True Green
- True Red
- Turqoise
- Twinkling Gold
- Violet
- White
- White Marble
- winter
- Yellow
Frequently asked questions
What temperature should I print Inland PLA at?
Inland lists 215–240°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Inland PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Inland PLA come in?
156 in the data we track, including Black, Blue, Blue (834598) and Blue (841288).