GST3D PLA+ print temperature and settings
The settings GST3D publishes for its PLA+: 210 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
GST3D's recommended nozzle range is right in line with the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size GST3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA+
Full PLA+ guide →A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.
33 GST3D PLA+ colors
- Apple Green
- Aquamarine
- Army Green
- Black
- Blue
- Bright Black
- Bright Blue
- Bright Gold
- Bright Green
- Bright Red
- Bright Silver
- Brown
- Crystal/Clear
- Firefly (Glow in the dark)
- Fluorescent Green
- Fluorescent Orange
- Fluorescent Yellow
- Fuchsia
- Gold
- Ice Blue
- Light Blue
- Light Pink
- Marble
- Mellow Yellow
- Metallic Bronze
- Mustard
- Orange
- Pink Panther
- Red
- Silver/Grey
- Violet
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print GST3D PLA+ at?
GST3D lists 210–210°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of GST3D PLA+?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does GST3D PLA+ come in?
33 in the data we track, including Apple Green, Aquamarine, Army Green and Black.