ELEGOO PLA+ print temperature and settings
The settings ELEGOO publishes for its PLA+: 210 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
ELEGOO's recommended nozzle range is right in line with the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size ELEGOO sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 320 m |
Printing PLA+
Full PLA+ guide →A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.
24 ELEGOO PLA+ colors
- Black
- Blue
- Brown
- Grey
- Orange
- Purple
- RAPID PLA+ Beige
- RAPID PLA+ Black
- RAPID PLA+ Blue
- RAPID PLA+ Brown
- RAPID PLA+ Green
- RAPID PLA+ Grey
- RAPID PLA+ Orange
- RAPID PLA+ Red
- RAPID PLA+ Silver
- RAPID PLA+ White
- RAPID PLA+ Yellow
- Red
- Sea Green
- Sky Blue
- Space Grey
- White
- Wood Color
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print ELEGOO PLA+ at?
ELEGOO lists 210–210°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of ELEGOO PLA+?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does ELEGOO PLA+ come in?
24 in the data we track, including Black, Blue, Brown and Grey.