ANYCUBIC PLA+ print temperature and settings
The settings ANYCUBIC publishes for its PLA+: 210 °C at the nozzle and 55 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
ANYCUBIC's recommended nozzle range is right in line with the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 55 °C | |
| Density | 1.23 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size ANYCUBIC sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 338 m |
Printing PLA+
Full PLA+ guide →A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.
11 ANYCUBIC PLA+ colors
- Black
- Blue
- Green
- Grey
- Light Blue
- Orange
- Purple
- Red
- Silver
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print ANYCUBIC PLA+ at?
ANYCUBIC lists 210–210°C at the nozzle and 55–55°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of ANYCUBIC PLA+?
About 338 m at 1.75 mm, from its published density of 1.23 g/cm³.
How many colors does ANYCUBIC PLA+ come in?
11 in the data we track, including Black, Blue, Green and Grey.