JAYO PLA+ print temperature and settings
The settings JAYO publishes for its PLA+: 210 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
JAYO's recommended nozzle range is right in line with the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size JAYO sells.
| Spool | 1.75 mm |
|---|---|
| 1.1 kg | ≈ 369 m |
Printing PLA+
Full PLA+ guide →A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.
13 JAYO PLA+ colors
- Black
- Blue
- Blue Silk
- Gold Silk
- Grass Green
- Green
- Grey-Blue
- Orange
- Pure Yellow
- Red
- White Transparent
- Wood
- Yellow
Frequently asked questions
What temperature should I print JAYO PLA+ at?
JAYO lists 210–210°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of JAYO PLA+?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does JAYO PLA+ come in?
13 in the data we track, including Black, Blue, Blue Silk and Gold Silk.