Sunlu PLA+ print temperature and settings
The settings Sunlu publishes for its PLA+: 210 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Sunlu's recommended nozzle range is right in line with the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Sunlu sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA+
Full PLA+ guide →A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.
27 Sunlu PLA+ colors
- Beige
- Black
- Blue
- Blue Grey
- Cherry Red
- Chocolate
- Coffee
- Cyan
- Fuchsia
- Gold
- Grass Green
- Green
- Grey
- Lemon Yellow
- Light Gold
- Mint Green
- Orange
- Pink
- Purple
- Red
- Sakura Pink
- Silver
- Sky Blue
- Sunny Orange
- Transparent Green
- White
- Yellow
Frequently asked questions
What temperature should I print Sunlu PLA+ at?
Sunlu lists 210–210°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Sunlu PLA+?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Sunlu PLA+ come in?
27 in the data we track, including Beige, Black, Blue and Blue Grey.