eSun PLA+ print temperature and settings
The settings eSun publishes for its PLA+: 220 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
eSun's recommended nozzle range is about 8°C hotter than the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).
Print settings
| Nozzle | 220 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.23 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size eSun sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 1 kg | ≈ 338 m | ≈ 127 m |
Printing PLA+
Full PLA+ guide →A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.
72 eSun PLA+ colors
- ePLA+HS Beige
- ePLA+HS Black
- ePLA+HS Blue
- ePLA+HS Bone White
- ePLA+HS Brown
- ePLA+HS Cold White
- ePLA+HS Dark Blue
- ePLA+HS Fire Engine Red
- ePLA+HS Gold
- ePLA+HS Green
- ePLA+HS Grey
- ePLA+HS Light Blue
- ePLA+HS Light Brown
- ePLA+HS Magenta
- ePLA+HS Olive Green
- ePLA+HS Orange
- ePLA+HS Peak Green
- ePLA+HS Pine Green
- ePLA+HS Pink
- ePLA+HS Purple
- ePLA+HS Red
- ePLA+HS Silver
- ePLA+HS Space Blue
- ePLA+HS Very Peri
- ePLA+HS White
- ePLA+HS Yellow
- PLA+ ALMOND YELLOW
- PLA+ APRICOT
- PLA+ BABY BLUE
- PLA+ BABY PINK
- PLA+ Beige
- PLA+ Black
- PLA+ Blue
- PLA+ Bone White
- PLA+ Brown
- PLA+ Cold White
- PLA+ CORAL ORANGE
- PLA+ Dark Blue
- PLA+ Fire Engine Red
- PLA+ Gold
- PLA+ Grass Green
- PLA+ Green
- PLA+ Grey
- PLA+ Haze Blue
- PLA+ Holly Green
- PLA+ Jade Green
- PLA+ Light Blue
- PLA+ Light Brown
- PLA+ LIGHT KHAKI
- PLA+ LILAC
- PLA+ Magenta
- PLA+ MATCHA GREEN
- PLA+ MILKY WHITE
- PLA+ MINT GREEN
- PLA+ Mustard Green
- PLA+ Olive Green
- PLA+ Orange
- PLA+ PEACH PINK
- PLA+ Peak Green
- PLA+ Pine Green
- PLA+ Pink
- PLA+ Purple
- PLA+ Red
- PLA+ RGB BLUE
- PLA+ RGB GREEN
- PLA+ RGB RED
- PLA+ Silver
- PLA+ Sky Blue
- PLA+ Space Blue
- PLA+ Very peri
- PLA+ White
- PLA+ Yellow
Frequently asked questions
What temperature should I print eSun PLA+ at?
eSun lists 220–220°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of eSun PLA+?
About 338 m at 1.75 mm, from its published density of 1.23 g/cm³.
How many colors does eSun PLA+ come in?
72 in the data we track, including ePLA+HS Beige, ePLA+HS Black, ePLA+HS Blue and ePLA+HS Bone White.