GEEETECH PLA print temperature and settings
The settings GEEETECH publishes for its PLA: 190–230 °C at the nozzle and 50–70 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
GEEETECH's recommended nozzle range is about 5°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 190–230 °C | |
|---|---|---|
| Bed | 50–70 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size GEEETECH sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
22 GEEETECH PLA colors
- Apple Green
- Black
- Blue
- Brown
- Grey
- Luminous Blue
- Luminous Green
- Luminous Orange
- Luminous Purple
- Luminous Rose red
- Luminous White
- Luminous Yellow
- Matte Dark Grey
- Matte Grey
- Matte Light Gray
- Matte Orange
- Matte Skin
- New Purple
- Orange
- Red
- Water Blue
- White
Frequently asked questions
What temperature should I print GEEETECH PLA at?
GEEETECH lists 190–230°C at the nozzle and 50–70°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of GEEETECH PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does GEEETECH PLA come in?
22 in the data we track, including Apple Green, Black, Blue and Brown.