Fusion ASA print temperature and settings
The settings Fusion publishes for its ASA: 290 °C at the nozzle and 100–110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Fusion's recommended nozzle range is about 35°C hotter than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 290 °C | |
|---|---|---|
| Bed | 100–110 °C | |
| Density | 1.08 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Fusion sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 385 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
19 Fusion ASA colors
- Carbon Rod Black
- Cold Fusion Blue
- Cosmic Ray Blue
- Electrolytic Deuterium
- Geomagnetic Mauve
- Heavy Water Blue
- Interstellar Emerald
- Ionized Cobalt Black
- Mushroom Cloud Grey
- Mystery
- Nano Tube Grey
- Plutonic Purple
- Radioactive Orange
- Radium Green 2.0
- Red Dwarf
- Seismic Red
- Sievert Silver
- Tritium Green
- Uranium Yellow
Frequently asked questions
What temperature should I print Fusion ASA at?
Fusion lists 290–290°C at the nozzle and 100–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Fusion ASA?
About 385 m at 1.75 mm, from its published density of 1.08 g/cm³.
How many colors does Fusion ASA come in?
19 in the data we track, including Carbon Rod Black, Cold Fusion Blue, Cosmic Ray Blue and Electrolytic Deuterium.