Fillamentum PLA print temperature and settings
The settings Fillamentum publishes for its PLA: 200 °C at the nozzle and 55 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Fillamentum's recommended nozzle range is about 15°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 200 °C | |
|---|---|---|
| Bed | 55 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Fillamentum sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 750 g | ≈ 251 m | ≈ 95 m |
| 2.5 kg | ≈ 838 m | ≈ 316 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
16 Fillamentum PLA colors
- Extrafill Cobalt Blue
- Extrafill Concrete Grey
- Extrafill Everybody's Magenta
- Extrafill Green Grass
- Extrafill Lilac
- Extrafill Metallic Grey
- Extrafill Natural
- Extrafill Peppered Mustard
- Extrafill Rapunzel Silver
- Extrafill Sky Blue
- Extrafill Traffic Black
- Extrafill Traffic Red
- Extrafill Traffic White
- Extrafill Traffic Yellow
- Extrafill Turquoise Blue
- Extrafill Vertigo Grey
Frequently asked questions
What temperature should I print Fillamentum PLA at?
Fillamentum lists 200–200°C at the nozzle and 55–55°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Fillamentum PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Fillamentum PLA come in?
16 in the data we track, including Extrafill Cobalt Blue, Extrafill Concrete Grey, Extrafill Everybody's Magenta and Extrafill Green Grass.