Fillamentum ASA print temperature and settings
The settings Fillamentum publishes for its ASA: 250 °C at the nozzle and 95 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Fillamentum's recommended nozzle range is about 5°C cooler than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 95 °C | |
| Density | 1.07 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Fillamentum sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 750 g | ≈ 291 m | ≈ 110 m |
| 2.5 kg | ≈ 971 m | ≈ 366 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
15 Fillamentum ASA colors
- Extrafill Anthracite Grey
- Extrafill Dijon Mustard
- Extrafill Green Grass
- Extrafill Grey Blue
- Extrafill Metallic Grey
- Extrafill Natural
- Extrafill Show White
- Extrafill Sky Blue
- Extrafill Traffic Black
- Extrafill Traffic Red
- Extrafill Traffic White
- Extrafill Traffic Yellow
- Extrafill Vertigo Grey
- Extrafill Vivid Pink
- Extrafill White Aluminium
Frequently asked questions
What temperature should I print Fillamentum ASA at?
Fillamentum lists 250–250°C at the nozzle and 95–95°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Fillamentum ASA?
About 389 m at 1.75 mm, from its published density of 1.07 g/cm³.
How many colors does Fillamentum ASA come in?
15 in the data we track, including Extrafill Anthracite Grey, Extrafill Dijon Mustard, Extrafill Green Grass and Extrafill Grey Blue.