Filament Unger · PLA+ filament

Filament Unger PLA+ print temperature and settings

The settings Filament Unger publishes for its PLA+: 220 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.

Filament Unger's recommended nozzle range is about 8°C hotter than the typical PLA+ across the 10 PLA+ lines we track (median 210–215°C).

Print settings

Nozzle220 °C
Bed60 °C
Density1.28 g/cm³
Diameters1.75 mm

Bars run on a fixed scale; the dashed line is the median of the 10 PLA+ lines we track. Data from SpoolmanDB.

How much filament is on a spool

Length from the published density, for each spool size Filament Unger sells.

Spool1.75 mm
1 kg≈ 325 m

Printing PLA+

Full PLA+ guide →

A modified PLA, tougher and less brittle than standard PLA while printing almost as easily. Each brand blends it differently.

No enclosure neededPrints fine on an open-frame printer.
Brass nozzle is fineNo abrasive fill.
Not very moisture-sensitiveNormal storage is fine for most users.
Any extruderWorks with direct drive and Bowden.

41 Filament Unger PLA+ colors

  • Anthrazitsilber
  • Braun
  • Elfenbein
  • Flip Flop Grün Gold
  • Flittergrün
  • Flitterlila
  • Gelb
  • Glimmer Blau
  • Glimmer Pink
  • Glimmer Rot
  • Glow in the Dark Grün
  • Gold
  • Grün
  • Haselnussbraun
  • Himmelblau
  • Kupfer
  • Leuchtgelb
  • Leuchtgrün
  • Leuchthellrot
  • Leuchtorange
  • Lila
  • Limette
  • Magenta
  • Marmor
  • Metallic Aubergine
  • Mintgrün
  • Oliv
  • Orange
  • Orientrot
  • Pastellblau
  • Pastellpink
  • Perlblau
  • Perlrot
  • Perlweiß
  • Rapunzelsilber
  • Signalgrau
  • Signalweiß
  • Ultramarinblau
  • Vanille
  • Verkehrsrot
  • Verkehrsschwarz
Check prices for Filament Unger PLA+ on Amazon.
Paid link: as an Amazon Associate we earn from qualifying purchases.
Search Amazon

Frequently asked questions

What temperature should I print Filament Unger PLA+ at?

Filament Unger lists 220–220°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.

How many meters are on a 1 kg spool of Filament Unger PLA+?

About 325 m at 1.75 mm, from its published density of 1.28 g/cm³.

How many colors does Filament Unger PLA+ come in?

41 in the data we track, including Anthrazitsilber, Braun, Elfenbein and Flip Flop Grün Gold.

Other PLA+ brands