Devil Design PLA print temperature and settings
The settings Devil Design publishes for its PLA: 220–235 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Devil Design's recommended nozzle range is about 13°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 220–235 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Devil Design sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
62 Devil Design PLA colors
- Aluminum
- Beige
- Black
- Blue
- Bright Green
- Bright Orange
- Bright Pink
- Bright Yellow
- Brown
- Copper
- Dark brown
- Dark Copper
- Dark Gray
- Dark Orange
- Dark Red
- Dark Steel
- Dark Violet
- Emerald Green
- Galaxy Black
- Galaxy Green
- Galaxy Red
- Galaxy Super Blue
- Galaxy Violet
- Glow In The Dark Blue
- Gold
- Graphite
- Gray
- Green
- Hot Red
- Light Brown
- Light Gray
- Light Green
- Light Steel
- Marble Dark
- Marble Light
- Mint
- Natural
- Navy Blue
- Ocean Blue
- Olive Green
- PC Gray
- Pink Pearl
- Race Green
- Red
- SILK Blue
- SILK Bright green
- SILK Bright orange
- SILK Bright pink
- SILK Bronze
- SILK Copper
- SILK Gold
- SILK Green
- SILK Light gold
- SILK Red
- SILK Silver
- SILK White
- Silver
- Super Blue
- Super Red
- Super Yellow
- White
- Yellow
Frequently asked questions
What temperature should I print Devil Design PLA at?
Devil Design lists 220–235°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Devil Design PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Devil Design PLA come in?
62 in the data we track, including Aluminum, Beige, Black and Blue.