Deeplee PLA print temperature and settings
The settings Deeplee publishes for its PLA: 220 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Deeplee's recommended nozzle range is about 5°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 220 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.25 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Deeplee sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 333 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
13 Deeplee PLA colors
- Matte Beige
- Matte Black
- Matte Blue Grey
- Matte Gris ardoise
- Matte Ice Blue
- Matte Mint Green
- Matte Navy Blue
- Matte Ruby Red
- Matte Sakura Pink
- Matte Slate Grey
- Matte Sunshine Yellow
- Matte Teal Green
- Matte White
Frequently asked questions
What temperature should I print Deeplee PLA at?
Deeplee lists 220–220°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Deeplee PLA?
About 333 m at 1.75 mm, from its published density of 1.25 g/cm³.
How many colors does Deeplee PLA come in?
13 in the data we track, including Matte Beige, Matte Black, Matte Blue Grey and Matte Gris ardoise.