Das Filament PLA print temperature and settings
The settings Das Filament publishes for its PLA: 220 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Das Filament's recommended nozzle range is about 5°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 220 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Das Filament sells.
| Spool | 1.75 mm |
|---|---|
| 800 g | ≈ 268 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
54 Das Filament PLA colors
- Anthrazit V2
- Anthrazit V2 - Refill
- Bronze
- Bronze - Refill
- DAS FILAMENT Grün
- DAS FILAMENT Grün - Refill
- Feuerrot
- Feuerrot - Refill
- Gold V2
- Gold V2 - Refill
- Grasgrün
- Grasgrün - Refill
- Grau
- Grau - Refill
- Himmelblau
- Himmelblau - Refill
- Kastanienbraun
- Kastanienbraun - Refill
- Kirschrot
- Kirschrot - Refill
- Königsblau
- Königsblau - Refill
- Magenta
- Magenta - Refill
- Metallic Rot
- Metallic Rot - Refill
- Natur
- Natur - Refill
- Neonorange
- Neonorange - Refill
- Reinorange
- Reinorange - Refill
- Schwarz
- Schwarz - Refill
- Schwarz matt
- Schwarz matt - Refill
- Silber
- Silber - Refill
- Sonnengelb
- Sonnengelb - Refill
- Tannengrün
- Tannengrün - Refill
- Thermo-Rot
- Thermo-Rot - Refill
- Toms3D Infinity Blue
- Toms3D Infinity Blue - Refill
- Tonweiß matt
- Tonweiß matt - Refill
- Transluzent Blau
- Transluzent Blau - Refill
- Transluzent Grün
- Transluzent Grün - Refill
- Weiß
- Weiß - Refill
Frequently asked questions
What temperature should I print Das Filament PLA at?
Das Filament lists 220–220°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Das Filament PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Das Filament PLA come in?
54 in the data we track, including Anthrazit V2, Anthrazit V2 - Refill, Bronze and Bronze - Refill.