AURAPOL PLA print temperature and settings
The settings AURAPOL publishes for its PLA: 210–240 °C at the nozzle and 40–60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
AURAPOL's recommended nozzle range is about 10°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 210–240 °C | |
|---|---|---|
| Bed | 40–60 °C | |
| Density | 1.223 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size AURAPOL sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 340 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
12 AURAPOL PLA colors
- Black
- Grey
- L-EGO blue
- L-EGO green
- L-EGO red
- L-EGO yellow
- leaf green
- Metallic Brick
- Natural
- Raspberry partially transparent
- White
- Yellow Green
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print AURAPOL PLA at?
AURAPOL lists 210–240°C at the nozzle and 40–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of AURAPOL PLA?
About 340 m at 1.75 mm, from its published density of 1.223 g/cm³.
How many colors does AURAPOL PLA come in?
12 in the data we track, including Black, Grey, L-EGO blue and L-EGO green.