AURAPOL ASA print temperature and settings
The settings AURAPOL publishes for its ASA: 255–265 °C at the nozzle and 105–115 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
AURAPOL's recommended nozzle range is about 5°C hotter than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 255–265 °C | |
|---|---|---|
| Bed | 105–115 °C | |
| Density | 1.039 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size AURAPOL sells.
| Spool | 1.75 mm |
|---|---|
| 850 g | ≈ 340 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
8 AURAPOL ASA colors
- Graphite black
- Green Grass
- Light Grey
- Natural
- Signal Orange
- Signal White
- Sky Blue
- Slate Gray
Frequently asked questions
What temperature should I print AURAPOL ASA at?
AURAPOL lists 255–265°C at the nozzle and 105–115°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of AURAPOL ASA?
About 400 m at 1.75 mm, from its published density of 1.039 g/cm³.
How many colors does AURAPOL ASA come in?
8 in the data we track, including Graphite black, Green Grass, Light Grey and Natural.