3DJAKE PLA print temperature and settings
The settings 3DJAKE publishes for its PLA: 215–230 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
3DJAKE's recommended nozzle range is about 8°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 215–230 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size 3DJAKE sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
37 3DJAKE PLA colors
- Black
- Bronze
- Brown
- CMYK Cyan
- CMYK Magenta
- CMYK White
- CMYK Yellow
- Dark Blue
- Dark Gray
- Dark Green
- Gold
- Light Blue
- Light Gray
- Light Green
- Neon Green
- Neon Orange
- Neon Yellow
- Orange
- Pastel Blue
- Pastel Green
- Pastel Pink
- Pink
- Red
- Silk Black
- Silk Blue
- Silk Copper
- Silk Gold
- Silk Green
- Silk Raspberry
- Silk Silver
- Silk Violet
- Silk Yellow
- Silver
- Transparent
- Violet
- White
- Yellow
Frequently asked questions
What temperature should I print 3DJAKE PLA at?
3DJAKE lists 215–230°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of 3DJAKE PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does 3DJAKE PLA come in?
37 in the data we track, including Black, Bronze, Brown and CMYK Cyan.