Siddament ABS print temperature and settings
The settings Siddament publishes for its ABS: 250 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Siddament's recommended nozzle range is about 3°C cooler than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Siddament sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 396 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
27 Siddament ABS colors
- Arctic Teal ABS
- Army Blue ABS
- Army Green ABS
- Ash Grey ABS
- Black ABS
- Blue ABS
- Earth Brown ABS
- Fossil Grey ABS
- Green ABS
- Lava Red ABS
- Lime Green ABS
- Mint Green ABS
- Muted Blue ABS
- Muted Purple ABS
- Muted White ABS
- Orange ABS
- Pastel Peanut ABS
- Pastel Watermelon ABS
- Pink ABS
- Purple ABS
- Red ABS
- Sakura Pink ABS
- Savannah Yellow ABS
- Silver ABS
- Sunrise Orange ABS
- White ABS
- Yellow ABS
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Siddament ABS at?
Siddament lists 250–250°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Siddament ABS?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does Siddament ABS come in?
27 in the data we track, including Arctic Teal ABS, Army Blue ABS, Army Green ABS and Ash Grey ABS.