Bambu Lab ABS print temperature and settings
The settings Bambu Lab publishes for its ABS: 250–270 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Bambu Lab's recommended nozzle range is about 7°C hotter than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 250–270 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Bambu Lab sells.
| Spool | 1.75 mm |
|---|---|
| 500 g | ≈ 198 m |
| 1 kg | ≈ 396 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
17 Bambu Lab ABS colors
- Azure
- Bambu Green
- Beige
- Black
- Blue
- Lavender
- Mint
- Navy Blue
- Olive
- Orange
- Purple
- Red
- Silver
- Support for ABS
- Tangerine Yellow
- White
- Yellow
Frequently asked questions
What temperature should I print Bambu Lab ABS at?
Bambu Lab lists 250–270°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Bambu Lab ABS?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does Bambu Lab ABS come in?
17 in the data we track, including Azure, Bambu Green, Beige and Black.