Rosa3D ABS print temperature and settings
The settings Rosa3D publishes for its ABS: 250 °C at the nozzle and 100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Rosa3D's recommended nozzle range is about 3°C cooler than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 100 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Rosa3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 396 m |
| 2.5 kg | ≈ 990 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
8 Rosa3D ABS colors
- Black
- Dark Blue
- Gray
- Green
- Juicy Orange
- Red
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Rosa3D ABS at?
Rosa3D lists 250–250°C at the nozzle and 100–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Rosa3D ABS?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does Rosa3D ABS come in?
8 in the data we track, including Black, Dark Blue, Gray and Green.