Printy Please ABS print temperature and settings
The settings Printy Please publishes for its ABS: 260 °C at the nozzle and 105 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Printy Please's recommended nozzle range is about 7°C hotter than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 105 °C | |
| Density | 1.09 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Printy Please sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 381 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
7 Printy Please ABS colors
- Cheshire Purple
- Jungle Prowler Green
- Mouse Blood Red
- Nebelung Grey
- Persian Pink
- Salem Black
- Void Black
Frequently asked questions
What temperature should I print Printy Please ABS at?
Printy Please lists 260–260°C at the nozzle and 105–105°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Printy Please ABS?
About 381 m at 1.75 mm, from its published density of 1.09 g/cm³.
How many colors does Printy Please ABS come in?
7 in the data we track, including Cheshire Purple, Jungle Prowler Green, Mouse Blood Red and Nebelung Grey.