Overture ABS print temperature and settings
The settings Overture publishes for its ABS: 245–265 °C at the nozzle and 80–100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Overture's recommended nozzle range is right in line with the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 245–265 °C | |
|---|---|---|
| Bed | 80–100 °C | |
| Density | 1.15 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Overture sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 362 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
14 Overture ABS colors
- Black
- Blue
- Dark Red
- Diamond Gray
- Diamond Orange
- Diamond Purple
- Glow Green
- Gray
- Green
- Natural
- Purple
- Slate Gray
- White
- Yellow
Frequently asked questions
What temperature should I print Overture ABS at?
Overture lists 245–265°C at the nozzle and 80–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Overture ABS?
About 362 m at 1.75 mm, from its published density of 1.15 g/cm³.
How many colors does Overture ABS come in?
14 in the data we track, including Black, Blue, Dark Red and Diamond Gray.