LDO ABS print temperature and settings
The settings LDO publishes for its ABS: 260 °C at the nozzle and 90–110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
LDO's recommended nozzle range is about 7°C hotter than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 90–110 °C | |
| Density | 1.06 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size LDO sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 392 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
10 LDO ABS colors
- Black
- Dark Teal
- LDO Blue
- Lemon Lime
- Light Blue
- Purple
- Red
- Smoke Gray
- Stardust Gray
- White
Frequently asked questions
What temperature should I print LDO ABS at?
LDO lists 260–260°C at the nozzle and 90–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of LDO ABS?
About 392 m at 1.75 mm, from its published density of 1.06 g/cm³.
How many colors does LDO ABS come in?
10 in the data we track, including Black, Dark Teal, LDO Blue and Lemon Lime.