Extrudr ABS print temperature and settings
The settings Extrudr publishes for its ABS: 250 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Extrudr's recommended nozzle range is about 3°C cooler than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.06 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Extrudr sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 750 g | ≈ 294 m | ≈ 111 m |
| 2 kg | ≈ 784 m | ≈ 296 m |
| 10 kg | ≈ 3922 m | ≈ 1479 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
9 Extrudr ABS colors
- DuraPro - Anthracite
- DuraPro - Black
- DuraPro - Blue
- DuraPro - Grey
- DuraPro - Metallic
- DuraPro - Nature
- DuraPro - Red
- DuraPro - Silver
- DuraPro - White
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Extrudr ABS at?
Extrudr lists 250–250°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Extrudr ABS?
About 392 m at 1.75 mm, from its published density of 1.06 g/cm³.
How many colors does Extrudr ABS come in?
9 in the data we track, including DuraPro - Anthracite, DuraPro - Black , DuraPro - Blue and DuraPro - Grey.