CR3D ABS print temperature and settings
The settings CR3D publishes for its ABS: 260 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
CR3D's recommended nozzle range is about 7°C hotter than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size CR3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 396 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
26 CR3D ABS colors
- ABS Anthrazitgrau
- ABS Brilliantrot
- ABS Carbon
- ABS Earth Grey
- ABS Feuerrot
- ABS Hellblau
- ABS HevORT Green
- ABS Leuchtgrün
- ABS Magenta
- ABS Magic Blue
- ABS Magic Green
- ABS Magic Magenta
- ABS Magic Red
- ABS Natur
- ABS Neon Gelb
- ABS Neon Grün
- ABS Neon Orange
- ABS Olivgrün
- ABS Perlweiß
- ABS Schwarz
- ABS Silber
- ABS Sonnengelb
- ABS Verkehrsgrün
- ABS Violett
- ABS Wasserblau
- ABS Wasserblau Magic
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print CR3D ABS at?
CR3D lists 260–260°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of CR3D ABS?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does CR3D ABS come in?
26 in the data we track, including ABS Anthrazitgrau, ABS Brilliantrot, ABS Carbon and ABS Earth Grey.