AzureFilm ABS print temperature and settings
The settings AzureFilm publishes for its ABS: 250 °C at the nozzle and 90–110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
AzureFilm's recommended nozzle range is about 3°C cooler than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 90–110 °C | |
| Density | 1.13 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size AzureFilm sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 368 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
15 AzureFilm ABS colors
- Plus BLACK
- Plus BLUE
- Plus GLITTER BLACK
- Plus GREEN
- Plus GREY
- Plus NATURE
- Plus ORANGE
- Plus RED
- Plus WHITE
- Plus YELLOW
- Prime Prime BLACK
- Prime Prime DARK BLUE
- Prime Prime RED
- Prime Prime SILVER
- Prime Prime WHITE
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print AzureFilm ABS at?
AzureFilm lists 250–250°C at the nozzle and 90–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of AzureFilm ABS?
About 368 m at 1.75 mm, from its published density of 1.13 g/cm³.
How many colors does AzureFilm ABS come in?
15 in the data we track, including Plus BLACK, Plus BLUE, Plus GLITTER BLACK and Plus GREEN.