Ambrosia ABS print temperature and settings
The settings Ambrosia publishes for its ABS: 225–265 °C at the nozzle and 75–115 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Ambrosia's recommended nozzle range is about 8°C cooler than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 225–265 °C | |
|---|---|---|
| Bed | 75–115 °C | |
| Density | 1.03 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Ambrosia sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 404 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
12 Ambrosia ABS colors
- Black
- British Racing Green
- Galactic Black
- Grey Abyss
- Hot Pink
- Über ABS Black
- Über ABS Natural
- Über ABS Pastel Pink
- Über ABS Purple
- Über ABS Red
- Über ABS White
- Voron Red
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Ambrosia ABS at?
Ambrosia lists 225–265°C at the nozzle and 75–115°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Ambrosia ABS?
About 404 m at 1.75 mm, from its published density of 1.03 g/cm³.
How many colors does Ambrosia ABS come in?
12 in the data we track, including Black, British Racing Green, Galactic Black and Grey Abyss.