add:north ABS print temperature and settings
The settings add:north publishes for its ABS: 245 °C at the nozzle and 105 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
add:north's recommended nozzle range is about 8°C cooler than the typical ABS across the 28 ABS lines we track (median 248–258°C).
Print settings
| Nozzle | 245 °C | |
|---|---|---|
| Bed | 105 °C | |
| Density | 1.04 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 28 ABS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 750 g | ≈ 300 m |
Printing ABS
Full ABS guide →A heat-resistant, tough plastic that can be sanded and acetone-smoothed, but warps without a warm, enclosed printer.
1 add:north ABS colors
- rABS - Black
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print add:north ABS at?
add:north lists 245–245°C at the nozzle and 105–105°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north ABS?
About 400 m at 1.75 mm, from its published density of 1.04 g/cm³.
How many colors does add:north ABS come in?
1 in the data we track, including rABS - Black.