Tinmorry PETG-CF print temperature and settings
The settings Tinmorry publishes for its PETG-CF: 220–250 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Tinmorry's recommended nozzle range is about 15°C cooler than the typical PETG-CF across the 7 PETG-CF lines we track (median 250–250°C).
Print settings
| Nozzle | 220–250 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PETG-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Tinmorry sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG-CF (carbon fiber PETG)
Full PETG-CF (carbon fiber PETG) guide →PETG reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PETG, with a matte finish.
10 Tinmorry PETG-CF colors
- Black
- Brick Red
- Carbon Blue
- Clay Yellow
- Coffee
- Marble Grey
- Olive Green
- Peacock Green
- Reddish Brown
- Violet
Frequently asked questions
What temperature should I print Tinmorry PETG-CF at?
Tinmorry lists 220–250°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Tinmorry PETG-CF?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Tinmorry PETG-CF come in?
10 in the data we track, including Black, Brick Red, Carbon Blue and Clay Yellow.