Bambu Lab PETG-CF print temperature and settings
The settings Bambu Lab publishes for its PETG-CF: 270 °C at the nozzle and 75 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Bambu Lab's recommended nozzle range is about 20°C hotter than the typical PETG-CF across the 7 PETG-CF lines we track (median 250–250°C).
Print settings
| Nozzle | 270 °C | |
|---|---|---|
| Bed | 75 °C | |
| Density | 1.25 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PETG-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Bambu Lab sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 333 m |
Printing PETG-CF (carbon fiber PETG)
Full PETG-CF (carbon fiber PETG) guide →PETG reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PETG, with a matte finish.
6 Bambu Lab PETG-CF colors
- Black
- Brick Red
- Indigue Blue
- Malachite Green
- Titan Gray
- Violet Purple
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Bambu Lab PETG-CF at?
Bambu Lab lists 270–270°C at the nozzle and 75–75°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Bambu Lab PETG-CF?
About 333 m at 1.75 mm, from its published density of 1.25 g/cm³.
How many colors does Bambu Lab PETG-CF come in?
6 in the data we track, including Black, Brick Red, Indigue Blue and Malachite Green.