GST3D PETG-CF print temperature and settings
The settings GST3D publishes for its PETG-CF: 240 °C at the nozzle and 70 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
GST3D's recommended nozzle range is about 10°C cooler than the typical PETG-CF across the 7 PETG-CF lines we track (median 250–250°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 70 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PETG-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size GST3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 320 m |
Printing PETG-CF (carbon fiber PETG)
Full PETG-CF (carbon fiber PETG) guide →PETG reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PETG, with a matte finish.
1 GST3D PETG-CF colors
- Black Carbon Fiber
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print GST3D PETG-CF at?
GST3D lists 240–240°C at the nozzle and 70–70°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of GST3D PETG-CF?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does GST3D PETG-CF come in?
1 in the data we track, including Black Carbon Fiber.