Extrudr PETG-CF print temperature and settings
The settings Extrudr publishes for its PETG-CF: 250 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Extrudr's recommended nozzle range is right in line with the typical PETG-CF across the 7 PETG-CF lines we track (median 250–250°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PETG-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Extrudr sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 800 g | ≈ 258 m | ≈ 97 m |
| 2.5 kg | ≈ 806 m | ≈ 304 m |
| 5 kg | ≈ 1611 m | ≈ 608 m |
| 10 kg | ≈ 3223 m | ≈ 1215 m |
Printing PETG-CF (carbon fiber PETG)
Full PETG-CF (carbon fiber PETG) guide →PETG reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PETG, with a matte finish.
1 Extrudr PETG-CF colors
- X - Black
Frequently asked questions
What temperature should I print Extrudr PETG-CF at?
Extrudr lists 250–250°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Extrudr PETG-CF?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does Extrudr PETG-CF come in?
1 in the data we track, including X - Black.