eSun PETG-CF print temperature and settings
The settings eSun publishes for its PETG-CF: 250 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
eSun's recommended nozzle range is right in line with the typical PETG-CF across the 7 PETG-CF lines we track (median 250–250°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.26 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PETG-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size eSun sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 330 m |
Printing PETG-CF (carbon fiber PETG)
Full PETG-CF (carbon fiber PETG) guide →PETG reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PETG, with a matte finish.
6 eSun PETG-CF colors
- Antique Brass
- Black
- Black Red
- Dark Blue
- Dark Green
- Dark Grey
Frequently asked questions
What temperature should I print eSun PETG-CF at?
eSun lists 250–250°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of eSun PETG-CF?
About 330 m at 1.75 mm, from its published density of 1.26 g/cm³.
How many colors does eSun PETG-CF come in?
6 in the data we track, including Antique Brass, Black, Black Red and Dark Blue.