Devil Design HIPS print temperature and settings
The settings Devil Design publishes for its HIPS: 235 °C at the nozzle and 100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Devil Design's recommended nozzle range is about 3°C hotter than the typical HIPS across the 3 HIPS lines we track (median 230–235°C).
Print settings
| Nozzle | 235 °C | |
|---|---|---|
| Bed | 100 °C | |
| Density | 1.05 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 3 HIPS lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Devil Design sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 396 m |
Printing HIPS
Full HIPS guide →A light, impact-resistant plastic mostly used as a dissolvable support for ABS (it dissolves in limonene).
1 Devil Design HIPS colors
- Black
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Devil Design HIPS at?
Devil Design lists 235–235°C at the nozzle and 100–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Devil Design HIPS?
About 396 m at 1.75 mm, from its published density of 1.05 g/cm³.
How many colors does Devil Design HIPS come in?
1 in the data we track, including Black.