AzureFilm PC print temperature and settings
The settings AzureFilm publishes for its PC: 270 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
AzureFilm's recommended nozzle range is right in line with the typical PC across the 7 PC lines we track (median 265–280°C).
Print settings
| Nozzle | 270 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.04 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PC lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size AzureFilm sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 400 m |
Printing PC (polycarbonate)
Full PC (polycarbonate) guide →Very strong and heat-resistant, and one of the most demanding filaments to print: high temperatures, an enclosure and dry filament.
3 AzureFilm PC colors
- PC ABS BLACK
- PC ABS NATUR
- PC ABS WHITE
Frequently asked questions
What temperature should I print AzureFilm PC at?
AzureFilm lists 270–270°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of AzureFilm PC?
About 400 m at 1.75 mm, from its published density of 1.04 g/cm³.
How many colors does AzureFilm PC come in?
3 in the data we track, including PC ABS BLACK, PC ABS NATUR and PC ABS WHITE.