add:north PC print temperature and settings
The settings add:north publishes for its PC: 280 °C at the nozzle and 110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
add:north's recommended nozzle range is about 8°C hotter than the typical PC across the 7 PC lines we track (median 265–280°C).
Print settings
| Nozzle | 280 °C | |
|---|---|---|
| Bed | 110 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PC lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 500 g | ≈ 160 m |
| 1 kg | ≈ 320 m |
Printing PC (polycarbonate)
Full PC (polycarbonate) guide →Very strong and heat-resistant, and one of the most demanding filaments to print: high temperatures, an enclosure and dry filament.
1 add:north PC colors
- PC Blend HT LCF - Black
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print add:north PC at?
add:north lists 280–280°C at the nozzle and 110–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north PC?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does add:north PC come in?
1 in the data we track, including PC Blend HT LCF - Black.