XZN PLA-CF print temperature and settings
The settings XZN publishes for its PLA-CF: 200–230 °C at the nozzle and 20–60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
XZN's recommended nozzle range is right in line with the typical PLA-CF across the 7 PLA-CF lines we track (median 200–230°C).
Print settings
| Nozzle | 200–230 °C | |
|---|---|---|
| Bed | 20–60 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 7 PLA-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size XZN sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 320 m |
Printing PLA-CF (carbon fiber PLA)
Full PLA-CF (carbon fiber PLA) guide →PLA reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PLA, with a matte finish.
4 XZN PLA-CF colors
- Black
- Blue
- Brick Red
- Matcha Green
Frequently asked questions
What temperature should I print XZN PLA-CF at?
XZN lists 200–230°C at the nozzle and 20–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of XZN PLA-CF?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does XZN PLA-CF come in?
4 in the data we track, including Black, Blue, Brick Red and Matcha Green.