Tinmorry · PETG-GF filament
Tinmorry PETG-GF print temperature and settings
The settings Tinmorry publishes for its PETG-GF: 220–250 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 220–250 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PETG-GF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Tinmorry sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
9 Tinmorry PETG-GF colors
- Frosted Beige
- Frosted Black
- Frosted Blue
- Frosted Carter Yellow
- Frosted Green
- Frosted Grey
- Frosted Orange
- Frosted Red
- Frosted White
Check prices for Tinmorry PETG-GF on Amazon.As an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Tinmorry PETG-GF at?
Tinmorry lists 220–250°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Tinmorry PETG-GF?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Tinmorry PETG-GF come in?
9 in the data we track, including Frosted Beige, Frosted Black, Frosted Blue and Frosted Carter Yellow.