Tinmorry · PET-GF filament
Tinmorry PET-GF print temperature and settings
The settings Tinmorry publishes for its PET-GF: 220–250 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 220–250 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.38 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PET-GF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Tinmorry sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 301 m |
1 Tinmorry PET-GF colors
- Black
Check prices for Tinmorry PET-GF on Amazon.Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Tinmorry PET-GF at?
Tinmorry lists 220–250°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Tinmorry PET-GF?
About 301 m at 1.75 mm, from its published density of 1.38 g/cm³.
How many colors does Tinmorry PET-GF come in?
1 in the data we track, including Black.