Tectonic 3D · CPE filament
Tectonic 3D CPE print temperature and settings
The settings Tectonic 3D publishes for its CPE: 240–270 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 240–270 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.25 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 CPE lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Tectonic 3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 333 m |
2 Tectonic 3D CPE colors
- Aura Co Polyester Red (RAL3020)
- Aura Co Polyester Yellow (RAL1023)
Check prices for Tectonic 3D CPE on Amazon.As an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Tectonic 3D CPE at?
Tectonic 3D lists 240–270°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Tectonic 3D CPE?
About 333 m at 1.75 mm, from its published density of 1.25 g/cm³.
How many colors does Tectonic 3D CPE come in?
2 in the data we track, including Aura Co Polyester Red (RAL3020) and Aura Co Polyester Yellow (RAL1023).