RatRig · PETG-CF10 filament
RatRig PETG-CF10 print temperature and settings
The settings RatRig publishes for its PETG-CF10: 240 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 PETG-CF10 lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size RatRig sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 322 m |
1 RatRig PETG-CF10 colors
- Punkfil Brute Black
Check prices for RatRig PETG-CF10 on Amazon.Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print RatRig PETG-CF10 at?
RatRig lists 240–240°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of RatRig PETG-CF10?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does RatRig PETG-CF10 come in?
1 in the data we track, including Punkfil Brute Black.