Fusion · HTPET+ filament
Fusion HTPET+ print temperature and settings
The settings Fusion publishes for its HTPET+: 275–285 °C at the nozzle and 100–110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Print settings
| Nozzle | 275–285 °C | |
|---|---|---|
| Bed | 100–110 °C | |
| Density | 1.35 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 1 HTPET+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Fusion sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 308 m |
24 Fusion HTPET+ colors
- Carbon Rod Black
- Cold Fusion Blue
- Cosmic Ray Blue
- Critical Mass Gold
- Electrolytic Deuterium
- Gatekeeper Orange
- Geomagnetic Mauve
- Heavy Water Blue
- Interstellar Emerald
- Ionized Cobalt Black
- Mushroom Cloud Grey
- Mystery
- Natural
- Neutron Green
- Nuclear Winter White 2.0
- Plutonic Purple
- Proton Pink
- Radioactive Orange
- Radium Green 2.0
- Reactor Red
- Red Dwarf
- Seismic Red
- Sievert Silver
- Tritium Green
Check prices for Fusion HTPET+ on Amazon.
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Fusion HTPET+ at?
Fusion lists 275–285°C at the nozzle and 100–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Fusion HTPET+?
About 308 m at 1.75 mm, from its published density of 1.35 g/cm³.
How many colors does Fusion HTPET+ come in?
24 in the data we track, including Carbon Rod Black, Cold Fusion Blue, Cosmic Ray Blue and Critical Mass Gold.