Filament Unger ABS+ print temperature and settings
The settings Filament Unger publishes for its ABS+: 260 °C at the nozzle and 100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Filament Unger's recommended nozzle range is about 19°C hotter than the typical ABS+ across the 4 ABS+ lines we track (median 238–245°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 100 °C | |
| Density | 1.02 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 4 ABS+ lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Filament Unger sells.
| Spool | 1.75 mm |
|---|---|
| 800 g | ≈ 326 m |
Printing ABS+
Full ABS+ guide →A modified ABS that most brands tune for less warping, with the same heat resistance and the same need for an enclosure.
14 Filament Unger ABS+ colors
- Blau
- Dunkelgrau
- Gelb
- Grün
- Hellgrau
- Leuchtgelb
- Leuchtgrün
- Leuchtorange
- Marmor
- Oliv
- Rot
- Schwarz
- Wasserblau
- Weiß
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Filament Unger ABS+ at?
Filament Unger lists 260–260°C at the nozzle and 100–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Filament Unger ABS+?
About 408 m at 1.75 mm, from its published density of 1.02 g/cm³.
How many colors does Filament Unger ABS+ come in?
14 in the data we track, including Blau, Dunkelgrau, Gelb and Grün.